# packages

pkgId: 2438c075d6bd8c3e5628419937591a22f96a36bb602035cd0e669befbe6dc506
name: combo-driver-devel
arch: noarch
version: 0.9.15
epoch: 0
release: 1
summary: COMBO driver header files
url: http://www.liberouter.org/
rpm_license: GPL
rpm_vendor: Cesnet
rpm_group: Base/Kernel
rpm_buildhost: oliver.liberouter.org
rpm_sourcerpm: combo-driver-0.9.15-1.src.rpm
location_href: combo-driver-devel-0.9.15-1.noarch.rpm
checksum_type: sha256
description:
  This package contains the header files for COMBO driver. Install this package
  if you want to write or compile a program that access COMBO family cards using
  the COMBO driver.


pkgId: c3fa18084d4311f6e6fa855b9ce5e927e58169716abe91014875906827f9c573
name: dtc
arch: x86_64
version: 1.4.6
epoch: 0
release: 1.el7
summary: Device Tree Compiler
url: https://devicetree.org/
rpm_license: GPLv2+
rpm_vendor: Cesnet
rpm_group: Unspecified
rpm_buildhost: bordeaux.liberouter.org
rpm_sourcerpm: dtc-1.4.6-1.el7.src.rpm
location_href: dtc-1.4.6-1.el7.x86_64.rpm
checksum_type: sha256
description:
  Devicetree is a data structure for describing hardware. Rather than hard coding
  every detail of a device into an operating system, many aspects of the hardware
  can be described in a data structure that is passed to the operating system at
  boot time. The devicetree is used by OpenFirmware, OpenPOWER Abstraction Layer
  (OPAL), Power Architecture Platform Requirements (PAPR) and in the standalone
  Flattened Device Tree (FDT) form.


pkgId: 5e96d5770df48fda3a6ec7b20ccce69283fc7caebe93d2d4da5d1591ca8e2a81
name: fastbit-compression-examples
arch: x86_64
version: 2.0.2.1
epoch: 0
release: 1
summary: Examples for FastBit
url: https://sdm.lbl.gov/fastbit/
rpm_license: LGPL v2.1 or later
rpm_group: Development/Databases
rpm_buildhost: collector-ipfix.liberouter.org
rpm_sourcerpm: fastbit-compression-2.0.2.1-1.src.rpm
rpm_packager: <>
location_href: fastbit-compression-examples-2.0.2.1-1.x86_64.rpm
checksum_type: sha256
description:
  FastBit is an open-source data processing library following the spirit
  of NoSQL movement. It offers a set of searching functions supported by
  compressed bitmap indexes. It treats user data in the column-oriented
  fashion similar to well-known database management systems such as Sybase
  IQ, MonetDB, and Vertica. It is designed to accelerate user's data
  selection tasks without imposing undue requirements. In particular, the
  user data is NOT required to be under the control of FastBit software.

  This package contains examples for FastBit.


pkgId: 083cdb58539e4b255bc982d386077397a51493ab4ed288307d4f7f02a686fccc
name: flowmon-exporter-plugins
arch: x86_64
version: 3.3.3
epoch: 0
release: 1
summary: Plugins for the INVEA-TECH flowmonexp-3.05 exporter.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: medoc.liberouter.org
rpm_sourcerpm: flowmon-exporter-plugins-3.3.3-1.src.rpm
rpm_packager: Petr Velan <petr.velan@cesnet.cz>
location_href: flowmon-exporter-plugins-3.3.3-1.x86_64.rpm
checksum_type: sha256
description:
  Plugins for the INVEA-TECH flowmonexp-3.05 exporter. Currently it includes
  plugins to process input from HANIC and PCAP.


pkgId: 4f8f0f792e50b8b7cf266633fbfc0b730a889156e4df6b4dbe8a78367adcf234
name: flowmon-exporter-plugins
arch: x86_64
version: 4.0.25
epoch: 0
release: 1
summary: Plugins for the INVEA-TECH flowmonexp-4.00 exporter.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o
rpm_group: Liberouter
rpm_buildhost: meter2.meter.cesnet.cz
rpm_sourcerpm: flowmon-exporter-plugins-4.0.25-1.src.rpm
rpm_packager: <>
location_href: flowmon-exporter-plugins-4.0.25-1.x86_64.rpm
checksum_type: sha256
description:
  Plugins for the INVEA-TECH flowmonexp 4.00 exporter. It includes following plugins:
  Input for HANIC, sze2 and sze2 with unified headers
  Process for DNS, IPv6 tunnels, SMTP, HTTP, HTTPS, tests
  Export for statistics


pkgId: 7dde33901bd18504c3a3de58b53fcf3329ceb81acf9e7d62a7520719c132e49f
name: flowmon-exporter-plugins
arch: x86_64
version: 5.0.0
epoch: 0
release: 1
summary: Plugins for the INVEA-TECH flowmonexp-4.00 exporter.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o
rpm_group: Liberouter
rpm_buildhost: meter7-test6.liberouter.org
rpm_sourcerpm: flowmon-exporter-plugins-5.0.0-1.src.rpm
rpm_packager: <>
location_href: flowmon-exporter-plugins-5.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  Plugins for the INVEA-TECH flowmonexp 5.03 exporter. It includes following plugins:
  Input: nfb
  Process: -
  Export: -


pkgId: 334069396ef7a98ae1e5d6927ad279103e4e28acf03b4b117d3937c986fe3932
name: flowmon-exporter-plugins
arch: x86_64
version: 5.1.0
epoch: 0
release: 1
summary: Plugins for the INVEA-TECH flowmonexp 11 exporter.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o
rpm_group: Liberouter
rpm_buildhost: meter7-test6.liberouter.org
rpm_sourcerpm: flowmon-exporter-plugins-5.1.0-1.src.rpm
rpm_packager: Lukas Hutak <lukas.hutak@cesnet.cz>
location_href: flowmon-exporter-plugins-5.1.0-1.x86_64.rpm
checksum_type: sha256
description:
  Plugins for the INVEA-TECH flowmonexp 11.x exporter. It includes following plugins:
  Input: nfb
  Process: -
  Export: -


pkgId: 20505e2b76c46eeeb8b1a22aca97ae68047fa5b207d4736732aebd38a837775a
name: flowmon-exporter-plugins-sdm
arch: x86_64
version: 4.0.25
epoch: 0
release: 1
summary: SDM plugins for the INVEA-TECH flowmonexp-4.00 exporter.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o
rpm_group: Liberouter
rpm_buildhost: meter2.meter.cesnet.cz
rpm_sourcerpm: flowmon-exporter-plugins-4.0.25-1.src.rpm
rpm_packager: <>
location_href: flowmon-exporter-plugins-sdm-4.0.25-1.x86_64.rpm
checksum_type: sha256
description:
  SDM plugins for the INVEA-TECH flowmonexp 4.00 exporter. It includes following plugins:
  Input for sze2 SDM
  Process for HTTP, HTTPS


pkgId: 850d79e8e1902fc3eb5c1fedb25a6bb4612d1cff795a1d5b7d0568f6b7781af5
name: flowmon-exporter-plugins-sdmcap-cli
arch: x86_64
version: 4.0.25
epoch: 0
release: 1
summary: Command line utility to control the sdmcap flowmonexp plugin.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o
rpm_group: Liberouter
rpm_buildhost: meter2.meter.cesnet.cz
rpm_sourcerpm: flowmon-exporter-plugins-4.0.25-1.src.rpm
rpm_packager: <>
location_href: flowmon-exporter-plugins-sdmcap-cli-4.0.25-1.x86_64.rpm
checksum_type: sha256
description:
  Command line utility to control the sdmcap flowmonexp plugin. It allows you to connect to running flowmonexp running sdmcap plugin and add, view or remove capture requests.


pkgId: bcfd7e0c383d1a7d85594033f6e96bbe1972b3cecbc2a3a00e464cf3f65cbdbe
name: flowmon-exporter-plugins-time_machine-cli
arch: x86_64
version: 4.0.25
epoch: 0
release: 1
summary: Command line utility to control the time_machine flowmonexp plugin.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o
rpm_group: Liberouter
rpm_buildhost: meter2.meter.cesnet.cz
rpm_sourcerpm: flowmon-exporter-plugins-4.0.25-1.src.rpm
rpm_packager: <>
location_href: flowmon-exporter-plugins-time_machine-cli-4.0.25-1.x86_64.rpm
checksum_type: sha256
description:
  Command line utility to control the time_machine flowmonexp plugin. It allows you to connect to running flowmonexp running time_machine plugin and control it.


pkgId: 829e41b5f108a30c216e50b662e3fa6f3839dc44bfd2e8209c757a43a703448f
name: flowmonexp-plugins
arch: x86_64
version: 2.0.3
epoch: 0
release: 1
summary: Plugins for the INVEA-TECH flowmonexp-2.x exporter.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: medoc.liberouter.org
rpm_sourcerpm: flowmonexp-plugins-2.0.3-1.src.rpm
rpm_packager: Radek Krejci <rkrejci@cesnet.cz>
location_href: flowmonexp-plugins-2.0.3-1.x86_64.rpm
checksum_type: sha256
description:
  Plugins for the INVEA-TECH flowmonexp-2.x exporter. Currently it includes
  plugins to process input from pcap, NIFIC, NIC, HANIC and FFlowMon LT.


pkgId: b9daa240a238d1d33524f88377506a9d9b9fa01f2f7587a1e93546e6bd4071af
name: hanic-flowmeter
arch: x86_64
version: 4.0.1
epoch: 0
release: 1
summary: Hashing Network Interface Card for Combov3 Cards with flowmonexp startup service
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: hanic-4.0.1-1.src.rpm
rpm_packager: Lukas Kekely <>
location_href: hanic-flowmeter-4.0.1-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains flowmonexp startup service. Install this package if you want to use flowmonexp meter based on HANIC.


pkgId: 0e53725bcfcf3802e6e4787d286981bc5fac4450e779470b3e38389372f8c2c4
name: ipfixcol-devel
arch: x86_64
version: 0.9.1
epoch: 0
release: 1
summary: IPFIX Collector development package
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: collector-ipfix.liberouter.org
rpm_sourcerpm: ipfixcol-0.9.1-1.src.rpm
rpm_packager: Petr Velan <petr.velan@cesnet.cz>
location_href: ipfixcol-devel-0.9.1-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files needed for development of plugins for IPFIX Collector (ipfixcol).


pkgId: b5d9f3b6b5d3150f320a4658e19492f80174b2eb32f2788cadc7d86a7a77130e
name: json-c
arch: x86_64
version: 0.10
epoch: 0
release: 2.el6
summary: A JSON implementation in C
url: https://github.com/json-c/json-c/wiki
rpm_license: MIT
rpm_vendor: Fedora Project
rpm_group: Development/Libraries
rpm_buildhost: buildvm-32.phx2.fedoraproject.org
rpm_sourcerpm: json-c-0.10-2.el6.src.rpm
rpm_packager: Fedora Project
location_href: json-c-0.10-2.el6.x86_64.rpm
checksum_type: sha256
description:
  JSON-C implements a reference counting object model that allows you to easily
  construct JSON objects in C, output them as JSON formatted strings and parse
  JSON formatted strings back into the C representation of JSON objects.


pkgId: e6e94dd2a045d6bfa66cc15d3b6c084b9b21f25860d1586b8b10dd42b6d94a83
name: libcombo
arch: x86_64
version: 1.8.7
epoch: 0
release: 1
summary: Library for COMBO family cards
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: oliver.liberouter.org
rpm_sourcerpm: libcombo-1.8.7-1.src.rpm
rpm_packager: Martin Spinler <spinler@cesnet.cz>
location_href: libcombo-1.8.7-1.x86_64.rpm
checksum_type: sha256
description:
  Library provides essential functions to enable work with COMBO family cards - booting firmware, initialization, I/O operations, configuration of firmware and its components.


pkgId: 1bde51dfb40923659b7a4902774faa7477ec682291752ba08af6b61fdf0431a5
name: libcombo-cv2-devel
arch: x86_64
version: 1.0.0
epoch: 0
release: 1
summary: libcombo-cv2 development package
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: libcombo-cv2-1.0.0-1.src.rpm
rpm_packager: Lukas Kekely <>
location_href: libcombo-cv2-devel-1.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files for libcombo-cv2 library, eventually some static libraries and symlinks to dynamic ones. Install this package if you want to write or compile a program that uses libcombo-cv2.


pkgId: 0caf935ba29133079739f878f3571df8092cd7d87a3cdd0f4e30b5560d83a110
name: libcombo-devel
arch: x86_64
version: 1.8.7
epoch: 0
release: 1
summary: libcombo development package
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: oliver.liberouter.org
rpm_sourcerpm: libcombo-1.8.7-1.src.rpm
rpm_packager: Martin Spinler <spinler@cesnet.cz>
location_href: libcombo-devel-1.8.7-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files for libcombo library, eventually some static libraries and symlinks to dynamic ones. Install this package if you want to write or compile a program that uses libcombo.


pkgId: 777166effc8c7411d80b003c21e9eb68abbce1cef1920895359bd17a2577b763
name: libcomet-devel
arch: x86_64
version: 1.0.0
epoch: 0
release: 1
summary: libcomet development package
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: sauvignon.liberouter.org
rpm_sourcerpm: libcomet-1.0.0-1.src.rpm
rpm_packager: Tomas Cejka <cejkat@cesnet.cz>
location_href: libcomet-devel-1.0.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files for libcomet library, eventually some static libraries and symlinks to dynamic ones. Install this package if you want to write or compile a program that uses libcomet.


pkgId: 2fb5906e6c785676a156b919031fe0b4b526aff5267b2e0aba61f45f598ab618
name: libcommlbr
arch: x86_64
version: 2.4.3
epoch: 0
release: 5
summary: Liberouter common library
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: libcommlbr-2.4.3-5.src.rpm
rpm_packager: <>
location_href: libcommlbr-2.4.3-5.x86_64.rpm
checksum_type: sha256
description:
  Library provides functions for Liberouter tools, simple parser for .ini-like config files, CRC32 algorithm, functions to cover common dbus procedures, verbose and debug macros, functions for common tasks with PCAP structures, PCAP library and time. Contains lbr-common library for Liberouter scripts.


pkgId: 1739976d0fb3046728da0af6b023da6340d3488ee67212911f671760b6174c8e
name: libcommlbr-devel
arch: x86_64
version: 2.4.3
epoch: 0
release: 5
summary: libcommlbr development package
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: libcommlbr-2.4.3-5.src.rpm
rpm_packager: <>
location_href: libcommlbr-devel-2.4.3-5.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files for libcommlbr library, eventually some static libraries and symlinks to dynamic ones. Install this package if you want to write or compile a program that uses libcommlbr.


pkgId: 3fb29bd4f0672f2aa83691de981d77b746c3e84a9c40c3da5a4032ee30fd749c
name: libcomregs-devel
arch: x86_64
version: 0.10.0
epoch: 0
release: 1
summary: libcomregs development package
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: sauvignon.liberouter.org
rpm_sourcerpm: libcomregs-0.10.0-1.src.rpm
rpm_packager: Tomas Cejka <cejkat@cesnet.cz>
location_href: libcomregs-devel-0.10.0-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files for libcomregs library. Install this package if you want to write or compile a program that uses libcomet.


pkgId: 994d7c84b91583370208008595476fbb77563de62c38e93337d0d11e9e8115f8
name: liberouter-tools
arch: x86_64
version: 1.3.9
epoch: 0
release: 1
summary: Various tools for Liberouter projects.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: oliver.liberouter.org
rpm_sourcerpm: liberouter-tools-1.3.9-1.src.rpm
rpm_packager: Martin Spinler <spinler@cesnet.cz>
location_href: liberouter-tools-1.3.9-1.x86_64.rpm
checksum_type: sha256
description:
  Package contains tools for manipulation with the COMBO cards and currently
  used firmware. Package includes crctest, csboot, csbus, csbus-i2cms,
  cscard-ident, cscrypto, csid, csxtool, c10g4ctl, dmactl, flstatctl,
  flwatchctl, generate-packet, hfexctl, hgenctl, ibufctl, i2cctl, mdio, obufctl,
  packetlog, phyterctl, sze2counter, sze2loopback, sze2machinegun, sze2multiread,
  sze2pcap, sze2read, sze2tap, sze2test, sze2write, tempctl, tsanalyzer, tsuctl,
  tsuctl2.


pkgId: e299ef43a80aa222bc8c6940dc62ce996d4629abf489f2f6375a51c3304a3e3b
name: liberouter-tools-cv2
arch: x86_64
version: 1.0.3
epoch: 0
release: 1
summary: Various tools for Liberouter projects.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: liberouter-tools-cv2-1.0.3-1.src.rpm
rpm_packager: Petr Velan <petr.velan@cesnet.cz>
location_href: liberouter-tools-cv2-1.0.3-1.x86_64.rpm
checksum_type: sha256
description:
  Package contains tools for manipulation with the COMBOv2 cards and currently
  used firmware. Package includes crctest, csboot, csbus, csbus-i2cms,
  cscard-ident, cscrypto, csid, csxtool, c10g4ctl, dmactl, flstatctl,
  flwatchctl, generate-packet, hfexctl, hgenctl, ibufctl, i2cctl, mdio, obufctl,
  packetlog, phyterctl, sze2counter, sze2loopback, sze2machinegun, sze2multiread,
  sze2pcap, sze2read, sze2tap, sze2test, sze2write, tempctl, tsanalyzer, tsuctl.


pkgId: 199b6b64bf473dc88428f1deee8ec69a9ff72e97573dfafa76602dde7c862e41
name: libfastbit
arch: x86_64
version: 2.0.3.2
epoch: 0
release: 1
summary: Shared libraries of FastBit
url: https://sdm.lbl.gov/fastbit/
rpm_license: LGPL v2.1 or later
rpm_group: System/Libraries
rpm_buildhost: collector-ipfix.liberouter.org
rpm_sourcerpm: fastbit-2.0.3.2-1.src.rpm
rpm_packager: <>
location_href: libfastbit-2.0.3.2-1.x86_64.rpm
checksum_type: sha256
description:
  FastBit is an open-source data processing library following the spirit
  of NoSQL movement. It offers a set of searching functions supported by
  compressed bitmap indexes. It treats user data in the column-oriented
  fashion similar to well-known database management systems such as Sybase
  IQ, MonetDB, and Vertica. It is designed to accelerate user's data
  selection tasks without imposing undue requirements. In particular, the
  user data is NOT required to be under the control of FastBit software.

  This package contains shared libraries of FastBit.


pkgId: 2b942fe2c78bde8abdc4cc9f86a53dfa637a01f316e3db6b1dc14dca7057c2d5
name: libfastbit-compression-devel
arch: x86_64
version: 2.0.2.3
epoch: 0
release: 1
summary: Development files of FastBit
url: https://sdm.lbl.gov/fastbit/
rpm_license: LGPL v2.1 or later
rpm_group: Development/C++
rpm_buildhost: collector-ipfix.liberouter.org
rpm_sourcerpm: fastbit-compression-2.0.2.3-1.src.rpm
rpm_packager: <>
location_href: libfastbit-compression-devel-2.0.2.3-1.x86_64.rpm
checksum_type: sha256
description:
  FastBit is an open-source data processing library following the spirit
  of NoSQL movement. It offers a set of searching functions supported by
  compressed bitmap indexes. It treats user data in the column-oriented
  fashion similar to well-known database management systems such as Sybase
  IQ, MonetDB, and Vertica. It is designed to accelerate user's data
  selection tasks without imposing undue requirements. In particular, the
  user data is NOT required to be under the control of FastBit software.

  This package contains development files of FastBit.


pkgId: faf5297eb653dd29de0db02774a28550ee5bd38c86653bea8122b6075913bfac
name: libnetconf
arch: x86_64
version: 0.0.1
epoch: 0
release: 1
summary: NETCONF protocol library for NETCONF applications.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: libnetconf-0.0.1-1.src.rpm
rpm_packager: David Kupka <david.kupka@gmail.com>
location_href: libnetconf-0.0.1-1.x86_64.rpm
checksum_type: sha256
description:
  Library provides NETCONF protocol functionality for both client as well as
  server side applications. It also handles access to the NETCONF
  configuration data repositories.


pkgId: 2a6c861071d8cc8059ca2e2911d382a28efe2191c681333dd152d479d853d95a
name: libnetconf-devel
arch: x86_64
version: 0.0.1
epoch: 0
release: 1
summary: libnetconf development package
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: libnetconf-0.0.1-1.src.rpm
rpm_packager: David Kupka <david.kupka@gmail.com>
location_href: libnetconf-devel-0.0.1-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files for libnetconf library. Install this package
  if you want to develop your own NETCONF application.


pkgId: 559f6f140d78a04a6eb92d8cdd44cda9224536e862913a5fbe28837e2c92b9e6
name: libnf-debuginfo
arch: x86_64
version: 1.17
epoch: 0
release: 1
summary: Debug information for package libnf
url: http://libnf.net
rpm_license: GPL
rpm_group: Development/Debug
rpm_buildhost: sauvignon.liberouter.org
rpm_sourcerpm: libnf-1.17-1.src.rpm
location_href: libnf-debuginfo-1.17-1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package libnf.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 7f9f73028037b28af584657b620e0ff05eb749e56582a811db5ac18b49a80a33
name: libnf-devel
arch: x86_64
version: 1.17
epoch: 0
release: 1
summary: Libraries and header files for the libnf.net library
url: http://libnf.net
rpm_license: GPL
rpm_group: Development/Libraries
rpm_buildhost: sauvignon.liberouter.org
rpm_sourcerpm: libnf-1.17-1.src.rpm
location_href: libnf-devel-1.17-1.x86_64.rpm
checksum_type: sha256
description:
  This package provides the libraries, include files, and other
  resources needed for developing libnf applications.


pkgId: 2d1d4d07a22e2584a3f8d6cdc5a6056d93a3e303c4bcff1faa3186f2267c82bf
name: libssh
arch: x86_64
version: 0.6.4
epoch: 0
release: 4.el6
summary: A library implementing the SSH protocol
url: http://www.libssh.org
rpm_license: LGPLv2+
rpm_group: System Environment/Libraries
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: libssh-0.6.4-4.el6.src.rpm
location_href: libssh-0.6.4-4.el6.x86_64.rpm
checksum_type: sha256
description:
  The ssh library was designed to be used by programmers needing a working SSH
  implementation by the mean of a library. The complete control of the client is
  made by the programmer. With libssh, you can remotely execute programs, transfer
  files, use a secure and transparent tunnel for your remote programs. With its
  Secure FTP implementation, you can play with remote files easily, without
  third-party programs others than libcrypto (from openssl).


pkgId: b65bad434e4c6daa29f9ea4e4a04bb432ccf3aa58ab5e207fab4063030a50961
name: libssh-devel
arch: x86_64
version: 0.6.4
epoch: 0
release: 4.el6
summary: Development files for libssh
url: http://www.libssh.org
rpm_license: LGPLv2+
rpm_group: Development/Libraries
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: libssh-0.6.4-4.el6.src.rpm
location_href: libssh-devel-0.6.4-4.el6.x86_64.rpm
checksum_type: sha256
description:
  The libssh-devel package contains libraries and header files for developing
  applications that use libssh.


pkgId: 463adaacb98b877622f1fbe879071da35e85ca441a0528272ac395a29a0a16af
name: libsze2
arch: x86_64
version: 1.1.8
epoch: 0
release: 1
summary: Library libsze2 - Fast Zero Copy Data Interface Version 2
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: andre.liberouter.org
rpm_sourcerpm: libsze2-1.1.8-1.src.rpm
rpm_packager: Jan Kucera <xkucer73@stud.fit.vutbr.cz>
location_href: libsze2-1.1.8-1.x86_64.rpm
checksum_type: sha256
description:
  Library provides both low-level and more user friendly high level functions to work with libsze2 - Fast Zero Copy Data Interface Version 2 Library.


pkgId: ed7e24530150e7db35d67682647c3d6945d9c2b8eefd4cbdd6465601c7fcbc4a
name: libsze2-devel
arch: x86_64
version: 1.1.8
epoch: 0
release: 1
summary: libsze2 development package
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: andre.liberouter.org
rpm_sourcerpm: libsze2-1.1.8-1.src.rpm
rpm_packager: Jan Kucera <xkucer73@stud.fit.vutbr.cz>
location_href: libsze2-devel-1.1.8-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files for libsze2 library, eventually some static libraries and symlinks to dynamic ones. Install this package if you want to write or compile a program that uses libsze2.


pkgId: edd28dc5f2d14ebc244944f957fad77fbb19a8606d2278f757709c1abe21add1
name: nemea-cesnet-modules-debuginfo
arch: x86_64
version: 1.0.0
epoch: 0
release: 2
summary: Debug information for package nemea-cesnet-modules
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Development/Debug
rpm_buildhost: sauvignon.liberouter.org
rpm_sourcerpm: nemea-cesnet-modules-1.0.0-2.src.rpm
rpm_packager: <>
location_href: nemea-cesnet-modules-debuginfo-1.0.0-2.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package nemea-cesnet-modules.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: 196bf95e94b74f7ded16aff85c6b8872cf39d4342eb9d9be1d97cde4c10fbf5c
name: netopeer-cli
arch: x86_64
version: 0.6.5
epoch: 0
release: 1
summary: Netopeer CLI client for NETCONF protocol.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: sauvignon.liberouter.org
rpm_sourcerpm: netopeer-cli-0.6.5-1.src.rpm
rpm_packager: Radek Krejci <rkrejci@cesnet.cz>
location_href: netopeer-cli-0.6.5-1.x86_64.rpm
checksum_type: sha256
description:
  CLI client connecting operator to a NETCONF capable device. This application
  is built on the libnetconf library.


pkgId: 415786da6cceb29a2edcfcec3a930b921c6ede19769d1e83c32cfe143fccf45d
name: netopeer-client
arch: x86_64
version: 0.0.1
epoch: 0
release: 1
summary: Netopeer - NETCONF implementation. Client part.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: netopeer-client-0.0.1-1.src.rpm
rpm_packager: David Kupka <david.kupka@gmail.com>
location_href: netopeer-client-0.0.1-1.x86_64.rpm
checksum_type: sha256
description:
  Netopeer project implements NETCONF protocol for remote configuration of
  network devices. This package contains its client part.


pkgId: 0bddb354c5173d8663180898d3f1656ab4746e7fdc3d68737452f1b628a1c0a5
name: netopeer-client
arch: x86_64
version: 0.2.0
epoch: 0
release: 1
summary: NETCONF CLI client.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: sauvignon.liberouter.org
rpm_sourcerpm: netopeer-client-0.2.0-1.src.rpm
rpm_packager: Radek Krejci <rkrejci@cesnet.cz>
location_href: netopeer-client-0.2.0-1.x86_64.rpm
checksum_type: sha256
description:
  Netopeer project implements NETCONF protocol for remote configuration of
  network devices. This package contains its CLI client.


pkgId: 19eec5d779de3afe75f585aae3c3aa71ba92632a2df3e371a95ddf9b03402418
name: netopeer-server
arch: x86_64
version: 0.0.1
epoch: 0
release: 1
summary: Netopeer - NETCONF implementation. Server part.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: netopeer-server-0.0.1-1.src.rpm
rpm_packager: David Kupka <david.kupka@gmail.com>
location_href: netopeer-server-0.0.1-1.x86_64.rpm
checksum_type: sha256
description:
  Netopeer project implements NETCONF protocol for remote configuration of
  network devices. This package contains its server part.


pkgId: fe6536a126ab3c2a6fb7dd9eae4cd588d4ddebedfdefdfff48f9c497e9b96f90
name: netopeer-server-devel
arch: x86_64
version: 0.1.10
epoch: 0
release: 1
summary: Netopeer server development package.
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: sauvignon.liberouter.org
rpm_sourcerpm: netopeer-server-0.1.10-1.src.rpm
rpm_packager: <>
location_href: netopeer-server-devel-0.1.10-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files for netopeer server. Install this package
  if you want to develop your own device modules.


pkgId: 3a288bc80560b808124ab821a8e7df2bc0e8b9a8a602d3e90f811ab9ed7c35cd
name: nsf-examples
arch: x86_64
version: 2.0.1
epoch: 0
release: 1+20190211121413+2cbcb69
summary: Example applications for using NSF
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: 84c95c2e19cd
rpm_sourcerpm: nsf-2.0.1-1+20190211121413+2cbcb69.src.rpm
location_href: nsf-examples-2.0.1-1+20190211121413+2cbcb69.x86_64.rpm
checksum_type: sha256
description:
  This package contains example applications and their sources for NSF. Install this package if you want some guidelines how to write your NSF applications.


pkgId: f356579f7044e160150f6c3d8e2fbb5956291da92821bf0fb40a777d63bf4683
name: sdm-debuginfo
arch: x86_64
version: 1.2.9
epoch: 0
release: 1
summary: Debug information for package sdm
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Development/Debug
rpm_buildhost: palava.liberouter.org
rpm_sourcerpm: sdm-1.2.9-1.src.rpm
rpm_packager: Jan Kucera <xkucer73@stud.fit.vutbr.cz>
location_href: sdm-debuginfo-1.2.9-1.x86_64.rpm
checksum_type: sha256
description:
  This package provides debug information for package sdm.
  Debug information is useful when developing applications that use this
  package or when debugging this package.


pkgId: c6c308a10b97ab67f461399394bd3df3db3d67b10ef27d225270acfaf1891d19
name: sdm-devel
arch: x86_64
version: 1.2.9
epoch: 0
release: 1
summary: Software Defined Monitoring for Combo-100G and Combo-80G Cards with header files
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: palava.liberouter.org
rpm_sourcerpm: sdm-1.2.9-1.src.rpm
rpm_packager: Jan Kucera <xkucer73@stud.fit.vutbr.cz>
location_href: sdm-devel-1.2.9-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains header files for libsdm library. Install this package if you want to write or compile a program that communicates with SDM controller.


pkgId: bb9e24c3209d0fd9c01bbc7076acbe76f3a7b242395ab0623d0de5f734fc3a7b
name: sdm-examples
arch: x86_64
version: 1.2.9
epoch: 0
release: 1
summary: Example applications for using SDM
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: palava.liberouter.org
rpm_sourcerpm: sdm-1.2.9-1.src.rpm
rpm_packager: Jan Kucera <xkucer73@stud.fit.vutbr.cz>
location_href: sdm-examples-1.2.9-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains example applications and their sources for SDM. Install this package if you want some guidelines how to write your SDM application.


pkgId: 4b4d5ce9ace8a7b05c9852fd37e22ba7f9cf5a65c4de215d20900f34bf88f1d9
name: sdm-flowmeter
arch: x86_64
version: 1.2.9
epoch: 0
release: 1
summary: Software Defined Monitoring for Combo-100G and Combo-80G Cards with flowmonexp startup service
url: http://www.liberouter.org/
rpm_license: BSD
rpm_vendor: CESNET, z.s.p.o.
rpm_group: Liberouter
rpm_buildhost: palava.liberouter.org
rpm_sourcerpm: sdm-1.2.9-1.src.rpm
rpm_packager: Jan Kucera <xkucer73@stud.fit.vutbr.cz>
location_href: sdm-flowmeter-1.2.9-1.x86_64.rpm
checksum_type: sha256
description:
  This package contains flowmonexp startup service. Install this package if you want to use flowmonexp meter based on SDM.


pkgId: 81d229487de72ab156693201c6a3aa1afbbe7107b3c28f454dd4faf50ccabaa5
name: tcpreplay
arch: x86_64
version: 3.4.4
epoch: 0
release: 902.liberouter
summary: Replay captured network traffic
url: http://tcpreplay.synfin.net/trac/
rpm_license: BSD
rpm_group: Applications/Internet
rpm_buildhost: panonia.liberouter.org
rpm_sourcerpm: tcpreplay-3.4.4-902.liberouter.src.rpm
location_href: tcpreplay-3.4.4-902.liberouter.x86_64.rpm
checksum_type: sha256
description:
  Tcpreplay is a tool to replay captured network traffic. Currently, tcpreplay
  supports pcap (tcpdump) and snoop capture formats. Also included, is tcpprep
  a tool to pre-process capture files to allow increased performance under
  certain conditions as well as capinfo which provides basic information about
  capture files.


# files

type: file
name:
  /var/www/netconfwebgui/vendor/vendor/symfony/src/Symfony/Component/Security/Acl/Resources/bin/generateSql.php


type: file
name:
  /var/www/netconfwebgui/vendor/vendor/bundles/Sensio/Bundle/DistributionBundle/Resources/bin/build_bootstrap.php


type: file
name:
  /var/www/netconfwebgui/vendor/vendor/bundles/Sensio/Bundle/DistributionBundle/Resources/bin/build.sh


type: file
name:
  /var/www/netconfwebgui/vendor/symfony/src/Symfony/Component/Security/Acl/Resources/bin/generateSql.php


type: file
name:
  /var/www/netconfwebgui/vendor/bundles/Sensio/Bundle/DistributionBundle/Resources/bin/build_bootstrap.php


